Overview

This folder contains Programming files for the Yaesu FTM-100D

Release: Generated on 2017-10-02 with WIA data from 170803

The files are import files for the Yaesu ADMS9 software with Data extracted from the WIA data set. (I don’t have current access to the RT-Systems software for the FTM-100)

Files

• Configuration

  • Not currently available – generated SD card file.

  • Not available – most recent Yaesu ADMS9 file

• Build Files to create standard configuration
  • RT-Systems
  • coming soon – template used to import more memories
  • coming soon – basic settings file options
  • The source data files for the FTM-100D are the same as the FTM-400D
  • [s3secureurl bucket=’warssharedfiles’ target=’/public/FTM-400D/vkrepftm-400drrtsa.csv’ expires=’25’]vkrepftm-400drrtsa.csv[/s3secureurl] – Output from the repeater configuration
  • [s3secureurl bucket=’warssharedfiles’ target=’/public/FTM-400D/vkrepftm-400drrtsb.csv’ expires=’25’]vkrepftm-400drrtsb.csv[/s3secureurl] – Output from the repeater configuration
• Yaesu ADMS-9 (These are actually the ADMS 7 files for FTM-400D)
  • [s3secureurl bucket=’warssharedfiles’ target=’/public/FTM-400D/vkrepftm-400dradms7a.csv’ expires=’25’]vkrepftm-400dradms7a.csv[/s3secureurl] – Output from the repeater configuration
  • [s3secureurl bucket=’warssharedfiles’ target=’/public/FTM-400D/vkrepftm-400dradms7b.csv’ expires=’25’]vkrepftm-400dradms7b.csv[/s3secureurl] – Output from the repeater configuration

Radio Load Steps

These steps are currently unavailable you will need to use the Yaesu ADMS 9 software or RT-Systems to generate files for the radio.

Configure your call sign and APRS

• If you load this CLN file it should prompt for a callsign on reboot.
• Both menus (Callsign and APRS) available from the DISP
• APRS – Modem and Auto Beacon are off in the config.
  • Menu 23. Callsign
  • Menu 5. Modem [OFF]/ON (ON means radio can start encoding and decoding)
  • Menu 15. Beacon TX – AUTO [OFF]/ON/Smart

If mobile probably change DISP>DISPLAY>7 fromTime to VDD for voltage.

In this configuration GPS is ON by Default and VFO A and B memory entries are configured with MID power.

Structure of entries

The FTM-100D supports 2 VFO’s ‘A’ and ‘B’ with 1 Transceiver. However only VFO ‘A’ can process C4FM. Each Band is allowed 500 entries.

• In most sections entries are sorted by Callsign

• Bank A memories are sorted:-
  • VK2RBV 7 (FM with TSQL 91.5)
  • VK2RBV 4 (FM with TSQL 91.5 Some Yaesu radios allow the specification of FM and C4FM with the memory entry, unfortunately the FTM don’t)
  • A selection of Favourites
    • VK2RBV VK2ROT VK2RCG VK2RCF VK2RWI VK2RMP VK2RBM
  • Remaining stations within 60km of Sydney
  • VK2 South Coast
  • VK2 North Coast
  • VK1 and 2 West
  • VK3 within 80km of Melbourne
  • VK3
  • VK4 within 80 km of Tamborine
  • APRS including AU and ISS and other countries
  • SIMPLEX including WICEN
  • VK1,2,3,4 without a permanent location (usually WICEN repeaters)
  • Some test entries
• Bank B memories are sorted:-
  • APRS AU
  • A selection of Favourites
    • VK2RBV VK2ROT VK2RCG VK2RCF VK2RWI VK2RMP VK2RBM
  • VK5
  • VK6
  • VK7
  • VK8
  • APRS including AU and ISS and other countries
  • SIMPLEX including WICEN
  • VK5,6,7,8 without a permanent location (usually WICEN repeaters)