Overview
This folder contains Programming files for the Icom ID-51A
Release: Generated on 2017-10-02 with WIA data from 170803
The files were prepared using the Icom CS-51 software with Data extracted from the WIA data set.
Files
- Configuration
- [s3secureurl bucket=’warssharedfiles’ target=’/public/ICOM/ICOM_51A/51_AUS_VK2BV.icf’ expires=’25’]51_AUS_VK2BV.icf[/s3secureurl] – most recent icom file
- Build Files to create standard configuration
- [s3secureurl bucket=’warssharedfiles’ target=’/public/ICOM/ICOM_51A/IcomDStar.zip’ expires=’25’]IcomDStar.zip[/s3secureurl] – Output from the repeater configuration
- icombankX.csv, icomgX.csv, icommemX.csv
- [s3secureurl bucket=’warssharedfiles’ target=’/public/ICOM/ICOM_51A/IcomDStar.zip’ expires=’25’]IcomDStar.zip[/s3secureurl] – Output from the repeater configuration
Radio Load Steps
- Steps to Load the config
- Create the directory structure on an SD card if you haven’t already.
- Insert and format an SD card in the radio.
- Menu>SD Card>Save Setting>New File>
This will create the folders and a backup file.
- Copy the new configuration to the card
- Power off handset and unload card, insert into PC.
- The file just created will be ID-51/Setting/setyyyymmdd.icf
- Copy the file 51_AUS_VK2BV.icf onto the SD
- Eject the card and load to radio.
- Menu>SD Card>Load Setting> 51_AUS_VK2BV.icf
- Except My Station (If your radio already has a setup)
- Keep Skip Yes
- Load Yes
- Reset Radio (Power on/off)
-
Configure your radio
- Enable BANK mode on VFO A and B
- Choose VFO A (short press om MAIN to swap)
- Press M/CALL to get to MR (memory) mode.
- Press Quick then select Bank Select > B:SYDCBD
- The VFO will wrap around the memories in Bank B (about 45)
-
Repeat for VFO B
The radio is now ready to operate in Bank mode on both VFO’s
- Change back to VFO A
- change to [DR] "Digital Mode" and adjust TO and FROM values
- To – change from "Local CQ" to "Your Call Sign" "Use Repeater"
- From – test near repeater.
Structure of entries
The ID-51 supports 2 VFO’s ‘A’ and ‘B’ with 1 Tranceivers. Both VFO’s can process D-Star. Memories and banks are available to both VFO’s.
-
In most sections entries are sorted by Callsign
-
The ID-51A supports 26 "Banks" (A-Z), a Memory can only be assigned to 1 bank.
- A DStar entries - B SYDCBD Stations within 60km of Sydney - C VK2 South Coast - D VK2 North Coast - E VK1 and 2 West - F WICEN - G MEL within 80km of Melbourne - H VK3 - I VK4SE within 80 km of Tamborine - J VK4 - K VK5-8 - L VK6 - M VK7 - N APRS including AU and ISS and other countries - O Test - X Marine